Connecting your DAQstuff to the world          DAQstuff Online

Automotive Distribution - Power Accessory Terminals   PAT

HOME 50 Pin 68 Pin 100 Pin DB9 DB25 DB37 VHDCI Breadboards Probes Current Shunts Automotive - PAT

   d-400122 $19.95   PAT 10-4-TR with FAST Transient Protection
                
Power Accessory Terminal Block with 10 Screws, 4 Fuses with Ground and Transient Protection

All Power Accessory Terminals come with 5 Feet of Red/Black 14G Power Wire FREE ! 

Easy Connect & Disconnect.   SAE2 connectors make it even easier !

                                 

Introducing the new   PAT 10-4-TR with FAST Transient Protection

If you are adding Electronic accessories to your 12v vehicle,

this is the power accessory panel that you want.

What makes this power distribution panel different from the others is that it simplifies that installation by the addition of a ground terminal with  every power lead.  This Power Accessory Terminal 'PAT' conveniently adds the standard 2 wires (power & ground) necessary to easily make your power connection for running your electronic accessories.  It is rated at 20 Amp and 32 VDC and wire size can be from 12 AWG to 18 AWG.

The Transzorbs provide fast acting Transient Protection.  The PAT 10-4-TR also clamps the DC Voltage at a Maximum of 16.4V for over Voltage Protection.  This device is designed for a 12 VDC Automotive System.

 

    ( Heat Shrinked Wire NOT Included )

Shown with 4 fuses                              It is rated at 20 Amp

                                 

                     
  USE IT IN YOUR   USE IT FOR YOUR   Quick and Easy to Install  
  RV     Cell Phone         Power Accessory Terminal  
  Car     GPS            
  ATV     IPOD         Fuses Included  
  Motorcycle   Radio         Qty 1 -  3 amp #d-100783  
  Boat     Camera         Qty 1 -  5 amp #d-100785  
  Snowmobile   Trailer         Qty 1 - 10 amp #d-100790  
                  Qty 1 - 15 amp #d-100805  

The panel is rated at 20 amps total in, with 4 fused outputs.  A variety of extra fuses are included so that you can install the optimum fuse and  also have spare.  NOTE: The accumulative output amperage (total) on these fuses cannot exceed 20 amp.

Try to select the amp fuse that is 120% of the max load.  That will allow the fuse to blow properly when a high current condition exists.  Total  current for the 4 outputs should not exceed 20 amps.  We typically use 3 amp fuses for most of our electronic gizmos.   

 

Power Accessory Terminal

 
             
        COLOR WIRE  
  SCREW FUSE   SHOULD BE SHOULD BE  
 

1

  Power IN Red 12awg to 18awg  
 

2

  Ground IN Black 14awg to 18 awg  
 

3

1

Power Out Red is OK 14awg to 18 awg  
 

4

1

Ground Out Black 14awg to 18 awg  
 

5

2

Power Out Red is OK 14awg to 18 awg  
 

6

2

Ground Out Black 14awg to 18 awg  
 

7

3

Power Out Red is OK 14awg to 18 awg  
 

8

3

Ground Out Black 14awg to 18 awg  
 

9

4

Power Out Red is OK 14awg to 18 awg  
 

10

4

Ground Out Black 14awg to 18 awg  
             
        DAQstuff
 

   

ABOVE;     PAT 10-4    shown with 4 Fuses    ( Heat Shrinked Wire NOT Included )

 

 

                                 

 

DAQstuff.com

 

To view your cart - Click below

 

HOME 50 Pin 68 Pin 100 Pin DB9 DB25 DB37 VHDCI Breadboards Probes Phoenix Contact NI Components