Connecting your DAQstuff to the world          DAQstuff Online

Automotive Distribution - Power Accessory Terminals   PAT

HOME 50 Pin 68 Pin 100 Pin DB9 DB25 DB37 VHDCI Breadboards Probes Current Shunts Automotive - PAT

   d-400112 $19.95   PAT 10-1-3   Power Accessory Terminal Block with 10 Screws, 1 Fuse with Ground and 3 Relays 

Easy Connect & Disconnect.   SAE2 connectors make it even easier !

                                 

All Power Accessory Terminals come with 5 Feet of Red/Black 14G Power Wire FREE !

Introducing the new   PAT 10-1-3

What makes this 3 Relay power distribution panel different from the others is that it simplifies that installation by the addition of 2 ground terminals for easy ground connect.  The Power Accessory Terminal 'PAT'  is rated at 20 Amp and 32 VDC and wire size can be from 12 AWG to 18 AWG.
It allows for each Relay to be individually controlled so each load can be selectively turned on or off.

Applying +12vdc to Terminals 4, 6 and 8 turn the relay coil on which activates the power out at Terminals 3, 5 and 7.
  

     
               
  USE IT IN YOUR   USE IT FOR YOUR  
  Motorcycle   Cell Phone      
  Car     GPS      
  ATV     IPOD      
  RV     Radio      
  Boat     Camera      
  Snowmobile   Trailer      
               

    
Try to select the amp fuse that is 120% of the max load.  That will allow the fuse to blow properly when a high current condition exists.  Total  current for the outputs should not exceed 20 amps.  We typically use a 10 amp fuse for most of our electronic applications.

Relaysare automotive type Relays which have low current 45mA coils.

      

                                 

#d-400112  PAT 10-1-3

Includes
Qty 2 - 10 amp #d-100790
Qty 2 8-32 3/8" Screws
Qty 2 8-32  Standoffs
Qty 2 8-32 3/4" Screws
 

If you are adding sensitive Electronic accessories to your 12v vehicle, this is the power accessory panel that you want.

MOUNTING INSTRUCTIONS:

1.  Drill 2 holes  .200 Dia on 2.438" center to center

2.  Quantity 2  8-32  3/8" mounting screws are included.

3.  Quantity 2  8-32  3/4" mounting screws are included.

Power Accessory Terminal
      COLOR WIRE
SCREW Relay   SHOULD BE SHOULD BE
1   Power IN Red 12awg to 18awg
2   Ground IN Black 14awg to 18 awg
3 1 Power Out Red is OK 14awg to 18 awg
4 1 Activates with 12 volts Colored 14awg to 18 awg
5 2 Power Out Red is OK 14awg to 18 awg
6 2 Activates with 12 volts Colored 14awg to 18 awg
7 3 Power Out Red is OK 14awg to 18 awg
8 3 Activates with 12 volts Colored 14awg to 18 awg
9   Ground Out Black 14awg to 18 awg
10   Ground Out Black 14awg to 18 awg
 
Applying +12vdc to Terminals 4, 6 and 8 turn the relay coil on which activates the power out at Terminals 3, 5 and 7.

                                 

 

DAQstuff.com

 

To view your cart - Click below

 

HOME 50 Pin 68 Pin 100 Pin DB9 DB25 DB37 VHDCI Breadboards Probes Phoenix Contact NI Components